| 
                            
                                |  |  
                                |  |  
                                | 
                                        
                                            | 
    
        
            | 
    
        |   |  
        | 1996 Link-Belt HTC8670, 70 Ton, Hydraulic Truck Crane; CranesList ID: 860,
 $107,900 usd
 
	38'-115' 4 Section Five Sheave Full Power Boom with Auxiliary Lifting Sheave,36.5'- 61' Stowable Swingaway Bifold Fly/Jib Off-settable to 2°, 20° and 40°,Main and Auxiliary winches with new 3/4" wire rope,Drum Rotation Indicator, 2 Speed, Electric Boom Angle and Length Indicator in Microguard 434 Rated Capacity Limiter, Anti-two-Block,Hook Block and Hook Ball,16,000# Counterweights,8' 6" Wide 8 x 4 Link-Belt Drive Carrier,Detroit DDEC Series 60 11.1L 365 H.P. Diesel Engine with Jake Brake,Eaton RTO–14909ALL; 11 speeds forward, 3 reverse Transmission - AS PER LINK-BELT SPECIFICATIONS AND SUBJECT TO FINAL CONFIRMATION,Air Conditioning,Heaters in both cabs,Tire Size Front: 445/65R22.5, Tire Size Rear: 12R22.5,Hydraulic Outriggers with stowable 24" Diameter Aluminum Floats,5th Front Outrigger,Confined Area Lifting Capacities (CALC) System operational in one of three outriggers positions: Full Extension, intermediate, and Full Retraction,Certified.LOCATED IN OREGON! |  |  
    
	
        
            | 
                    
                        
                        | 
                                
                                    | SELLER WILL DELIVER TO SEATTLE OR PORTLAND INCLUDED IN THE PRICE |  |  |  
    
        
            | 
    
        |   |  
        | 1973 Manitowoc 4000W, 150 Ton, Lattice Boom Crawler Crane; CranesList ID: 857,
 $162,500 usd
 
	180' Total Main Boom consisting of 70’ X 95” X 95”of basic No. 22A Angular Lattice Boom (30’ Base and 40’ Open-Throat Tip Section) 110’X 95” X 95” of 22A boom inserts, Some lattices require repair but not enough to keep any of the boom from being utilized on the crane.40’ of No. 123 Fixed Lattice Jib (15-ton maximum capacity),Gantry Lifting Device,Main and Auxiliary Winches with 1 1/8" wire rope,Vicon Power lowering, Boom Angle Indicator, Anti Two Block,Independent Dual Drum Boom Hoist, Swing and Travel, Hook Ball,Hook Block,104,400# Three Section Self-Removing Counterweights,18' 7" wide carbody with crawlers retracted,Caterpillar 3406D1 Diesel Engine, Serial # 90U1785,CAT Diesel had new starter and Turbo installed in 2023, VICON” (Variable Independent Control) power transmission provides independent power through two torque converters.  Front converter powers hoisting drums while the rear converter powers the swing and travel machinery, Heater,48" wide crawler treads,52 pads per crawler,Runs like new,Crane is Certified!LOCATED IN ALASKA! |  |  
    
        
            | 
    
        |   |  
        | 1989 Krupp KMK5100, 100 Ton All Terrain Crane; CranesList ID: 729,
 $44,900 usd
 
	43’ - 138’ Four Section Full Power Boom with Auxiliary Boom Nose,38'- 62' Two Stage Extension (Jib),Main and Auxiliary Winches with 23mm Wire RopeElectronic Load Moment Safety Device And Anti-Two Block System,Mercedes-Benz OM 366 LA, 168 HP, 6 cylinders, water cooled Diesel Engine (Upper) - AS PER KRUPP SPECIFICATIONS AND SUBJECT TO FINAL CONFIRMATION. Hook Ball and Block,9.8' wide Krupp 10 x 8 Drive Carrier,Mercedes-Benz OM 424 420 HP, 12 cylinders, Water Cooled Diesel Engine - AS PER KRUPP SPECIFICATIONS AND SUBJECT TO FINAL CONFIRMATION.Allison 5 Gear Automatic Powershift, CLBT 754 Transmission,Front and Rear Tires: 16.00 R25 - AS PER KRUPP SPECIFICATIONS AND SUBJECT TO FINAL CONFIRMATION.,2nd, 4th and 5th axles with transverse differential lock, 4th axle with longitudinal differential lock,Power Steering leaks,LOCATED IN ONTARIO CANADA! |  |  
    
        
            | 
    
        |   |  
        | 2020 Heila-Kenworth, HLR70000-3S, 30 Ton, KnuckleBoom Crane; CranesList ID: 869,
 $339,000 usd
 
	28′ Three Hydraulic Articulating Boom Sections, Horizontal Cap: 60,000 lb @ 8′, 37,000 lb @ 13.5′,  7,500 lb @ 18.5′,  20,000 lb @ 23′,  14,300 lb @ 28′DANFOSS Proportional Valve Controls – Single Sided Operator Control StationSCANRECO Wireless Radio Remote Included,Centered Knuckle with No Offset,Dual Main Lift Cylinders and Dual Extension Cylinders,Planetary Pedestal – Continuous Boom Rotation,Load Holding Valves on All Cylinders,2 Batteries for Remote 50′ Backup Cord,Rear Mounted behind the cab of a 2020 Kenworth T880 Six Axle (Including Pusher Axles) Double Frame Truck, Hardwood Deck - 8′ Wide with Standard Rub Rail All Around, 60″ Headboard Behind Cab, Sliding Track on Passenger Side w/8 Winches, Dual Front Access Ladders, Winch Bar & Winch Bar Holder,Cummins ISX-15 600 HP Diesel Engine with Jake Brake,Eaton 18 Speed Ultrashift Transmission,Front and Rear Tires: 425/65/R22.5 Tires with Aluminum Rims,GPS Navigation SystemAM-FM/CD Player/Weather Band,Heated Mirrors,Power Windows & Door Locks,Air Conditioning,120-Gallon Fuel Tank,Chalmers Supension,Hydraulic Out & Down 2-Sided (Independently Controlled) Stabilizers,36" Storage Box installed under the deck,Fleet-maintained, one-owner machine,Certified.LOCATED IN NORTH CAROLINA! |  |  |  |  
                                |  |  |