1997 Elliot-Ford ECI-3-70 Aerial Work Platform and Crane; CranesList ID: 712,

• 60' maximum Side Reach,
• Main Winch,
• Detachable Work Platform: Steel inverted "A" sub frame with fiberglass open grating bottom and fiberglass tubular railsbonded and bolted with nylon bolts, 2" Diameter platform, 40" x 60" Platform with 600# capacity,
• Lower Control Box: Steel Box with lockable door on curb-side at turret base,
• Platform Controls: Three individual proportional electronic controllers meter pilot-operated, pressure-compensated modulating valves. Remote controls for boom operations from platform operate from a steel remote control box. Hi/Lo range, start/stop and engine speed switches are also located at platform. Electric remote control cable extends through the electrical slip ring to cable carrier on side of boom to extending boom sections.
• Platform Leveling System: Hydraulic "closed" system consisting of twin platform cylinders interacting with a boom-actuated master cylinder mounted in "gooseneck" of boom support turret. System provided with factory-set relief valves to compensate for oil expansion or overload during platform leveling operation. Remote releveling controls provided in platform and at ground controls to give precise re-leveling capability.
• 360° Non Continuous Rotation,
• Mounted behind the cab of a Ford F-800 Two Axle Truck; Vehicle Identification Number: 1FDXF80E4VVA28915,
• 8.3 Cummins Diesel Engine,
• Allison Automatic Transmission,
• Front and Rear Tires: 11R 22.5G,
• Two Amber Dome lights on truck cab,
• Front and Rear Out and Down Outriggers,
• Fifth Front Outrigger,
• Storage Locker,
• 690 Hours as of 8.2022,
• 7,175 thought to be Original Miles as of 8.2022.

http://www.CranesList.com,

LOCATED IN NEVADA!